As a newbie to TGM, I am trying to come up to speed as quickly as possible with the nomenclature and fundamentals. Please bear with me....
The question I have is related to the extra "cupping" I get in the right wrist if/when I cock the left wrist in the back swing.
From the various TGM and LBG videos I've watched, I know:
1) The importance of maintaining the left and right arm flying wedges throughout the swing.
2) The Left Wrist can cock in the vertical plane (i.e. but it can't rotate or turn).
3) The right forearm needs to be on plane with the shaft and the right wrist needs to be at the same flying wedge angle as impact fix no later than the top of the backswing.
4) Lynn espouses that the angle of the right flying wedge should be maintained throughout the swing (or well into the finish).
When I cock the left wrist, however, the right wrist is bent back (i.e. "cupped" in Ben Hogan-speak) much further than the angle at impact fix (the right forearm is still on plane, however).
Because the grip of the right hand is such that the left thumb fits into the life-line of the right hand, it would seem that ANY cocking of the left hand would automatically change the angle of the right wrist as well.
To me it seems that if you want to take advantage of any wrist cocking (power accumulator # ??), you can't possibly maintain a constant right wrist angle.
Hopefully, I described my confusion in the proper terms...
As a newbie to TGM, I am trying to come up to speed as quickly as possible with the nomenclature and fundamentals. Please bear with me....
The question I have is related to the extra "cupping" I get in the right wrist if/when I cock the left wrist in the back swing.
From the various TGM and LBG videos I've watched, I know:
1) The importance of maintaining the left and right arm flying wedges throughout the swing.
2) The Left Wrist can cock in the vertical plane (i.e. but it can't rotate or turn).
3) The right forearm needs to be on plane with the shaft and the right wrist needs to be at the same flying wedge angle as impact fix no later than the top of the backswing.
4) Lynn espouses that the angle of the right flying wedge should be maintained throughout the swing (or well into the finish).
When I cock the left wrist, however, the right wrist is bent back (i.e. "cupped" in Ben Hogan-speak) much further than the angle at impact fix (the right forearm is still on plane, however).
Because the grip of the right hand is such that the left thumb fits into the life-line of the right hand, it would seem that ANY cocking of the left hand would automatically change the angle of the right wrist as well.
To me it seems that if you want to take advantage of any wrist cocking (power accumulator # ??), you can't possibly maintain a constant right wrist angle.
Hopefully, I described my confusion in the proper terms...
Could type a big giant reply....but seeing is believing....here are model wedge alignments....level unstressed froze right wrist...when you have your right wrist level with an open hand if you were to extend your arm parallel to the ground your fingers would point down to the ground on a diagonal....level is pretty close to uncocked....this may not be what people think of as the sexiest swing...but these wedge alignments are freakin' perfect....NO COCKING IN THE RIGHT WRIST AT ALL...
Its very grip type dependent too. A 10-2-D would see the left wrist cocking bend the right hand proportionaly for instance.
Send a photo of your grip maybe and your backswing from down the line. I wouldn't do that personally given the nut bars around here but ....
Unfortunately, the videos that you reference are inaccessible at this precise moment.
However, the other Steve Stricker Youtube videos that are visible show a swing with minimal (if any) left wrist cocking in the backswing (in my very inexperienced and humble opinion).
I'm OK with this but I just can't figure out how you can accomplish a cocking left wrist without also cupping the right wrist to an equal extent. It just doesn't seem possible.
Try making a backswing without a club. Right arm bends from the get go of the backswing takeaway. They work together. If you only cock the left wrist and keep the elbow in the same bent, then you screw up the right wrist alignment.
Try making a backswing without a club. Right arm bends from the get go of the backswing takeaway. They work together. If you only cock the left wrist and keep the elbow in the same bent, then you screw up the right wrist alignment.
Interesting bit of reverse engineering Doctor. Never thought of that one.
I think I have the answer to my question. Please respond if my understanding is still incorrect.
According to Lynn in the Drills DVD (under the drill entitled "Educating the Right Wrist"), the right wrist can "turn and roll".
However, another video taken from YouTube ("Dowels Wedges") shows Lynn saying that the right is wrist is incorrectly positioned by "cocking and uncocking".
As an aside, I think I understand the subtleties between turning/rolling and cocking/uncocking. However, Lynn's wrist action seems very similar in both these particular cases (even though he said one was correct and the other incorrect).
Back to the point, I can only assume that the act of rolling the right wrist allows the left wrist to cock in the backswing while maintaining the correct impact fix flying wedge of the right forearm.
Last edited by ckniker : 09-22-2011 at 11:27 AM.
Reason: added youtube pointers
Could type a big giant reply....but seeing is believing....here are model wedge alignments....level unstressed froze right wrist...when you have your right wrist level with an open hand if you were to extend your arm parallel to the ground your fingers would point down to the ground on a diagonal....level is pretty close to uncocked....this may not be what people think of as the sexiest swing...but these wedge alignments are freakin' perfect....NO COCKING IN THE RIGHT WRIST AT ALL...
Sorry, but in both videos at the :08 mark, the right wrist has clearly cocked up from the LEVEL(partially uncocked) position. ANY swing in which the club is swung up over the right shoulder with the shaft pointing targetward, even if not horizontal, HAS to cock the right wrist. Were his right wrist level at the Top, the shaft would point straight up or backwards. Most tour players cock the right wrist, and just because TGM prescribes otherwise, the reality can't be denied.
Sorry, but in both videos at the :08 mark, the right wrist has clearly cocked up from the LEVEL(partially uncocked) position. ANY swing in which the club is swung up over the right shoulder with the shaft pointing targetward, even if not horizontal, HAS to cock the right wrist. Were his right wrist level at the Top, the shaft would point straight up or backwards. Most tour players cock the right wrist, and just because TGM prescribes otherwise, the reality can't be denied.
I'm not seeing that..... but fine with me...bottom line is this dude's right wrist is as close to motionless as far as cocking goes as it gets....I'm pretty sure that reality can't be denied as well. Certainly Stricker has less motion than most....I still stand by the statement that his wedge alignments are model according to strict definition. But of course people can do whatever they want with their components....but I think Stricker's wedge alignments are as precise as anybody's....not big on some of the other stuff he does but I dig the wedges.
Linear Mode
