[BR283]

I built a set of Wishon clubs and bent them 2* upright. After getting used to hitting I have come to realize that they are now too upright and need to be flatter, so the experiment goes like you say, do the PW and go from there. I agree that too much may be taken into droop. I FLO all my shafts and with graphite, especially with a pronounced spine, the FLO plane is usually 90* to the spine so in orienting shaft to head the FLO plane is at 3 to 9 o'clock and spine at 12 o'clock, to minimize droop, but no matter what lie angle will need to be adjusted accordingly, as every swing is different, flex etc. So to me impact tape, sole tape, lie board on the range will tell, but we must get this right. I like the way you measure and triagulate to get an initial lie angle then go up as needed. Ill remenber that, thanks.